18 Initial Checks Of Electrical Installations Every Electrician MUST Perform

electrical installations

Testing of Electrical Installation 

Before any testing of low voltage electrical installations (and equipment) is carried out, a detailed physical inspection must be made to ensure that everything is:
1. To a relevant National or Harmonized European Standard
2. Erected/installed in compliance with the IEE Regulations 
3. Not damaged in such a way that it could cause danger

General Testing Checklist

1.Connections of Conductors
Are terminations electrically and mechanically sound ? Is installation and sheathing removed only to a minimum to allow satisfactory termination ?

2.Identification of Conductors
Are conductors correctly identified in accordance with the regulations?
identification of conductors

3.Routing of Cables
Are cables installed such that account is taken of external influences, such as mechanical damage, corrosion and heat?

4.Conductor Selection
Are conductors selected for current carrying capacity and voltage drop in accordance with the design?

5.Connection of single pole device
Are single pole protective and switching devices connected in the line conductor only?
connection of single pole device

6.Accessories and equipment
Are all accessories and items of equipment correctly connected?

7.Thermal effects
Are fire barriers present where required and protection against thermal effects provided ?

8. Protection against shock
What methods have been used to provide protection against electrical shock ?

9.Mutual detrimental influence
Are wiring systems installed so that they can have no harmful effect on non-electrical system or so that system of different currents or voltages are segregated where necessary ?

Regular Motor Maintenance To Avoid Failure

Motor Maintenance

A well carefully designed motor maintenance program, when correctly used, can be summed up as
1.Preventive maintenance
2.Predictive maintenance
3.Reactive maintenance

Inspection cycle depend upon the type of motor and the conditions under which it operates.

Motors need maintenance regularly in order to avoid failure and prolong their lifespan. Generally speaking, motors and motor parts should be maintained and tested at every 6 months.

1.Preventive maintenance
The objective of this kind of maintenance is to prevent operating problems and make sure that the motor continuously provides a reliable operation usually, preventive maintenance is a scheduled part of maintenance a whole system.
   

2.Predictive maintenance
The objective of this kind of motor maintenance is to ensure that the right kind of maintenance is carried out at the right time. In order to define these two parameters, it is necessary to monitor the motor operation regularly and thereby detect problems before they actually occur.


3.Reactive maintenance
The main objective of this kind of maintenance is to repair and replace the motor when a failure occurs. Reactive maintenance or breakdown maintenance as it is referred to as well, does not imply any regular service or tests.